AWIS is an automatic system for factories truck loading and weighing manipulation. There are five diff erent weighing procedures according to the programmed card type: Bulk loading, material sent, intake material, other types of weighing and internal factory handle.
Program Overview
User’s full programmable weighing tickets:
Separate Ticket For First and Second Weighing
Separate Ticket For each Weighing Procedure
Separate Ticket For each Weighing Terminal
Ticket Printed on Network PC or Weighing Indicator
Entry – Exit From any Weighing Point
Advanced vehicle management:
Vehicle Legal Gross Check
Vehicle Nominal Tare Check
Card Type Specific Checks before each Weighing
Truck can be Joined at Groups for Easy Management
Different Truck types
Permanent or Temporary Cards for each Vehicle
Bulk Loading:
Up to Fifteen Silo Connected at each Weighing Terminal
Programmable recipe for each Silo(Coarse,fine,preact)
Custom or General Recipe for Each truck or Card.
Several cross checking procedures take place in, before, after and in parallel, such as Cross checking of Tare and Net,Over load checking, Recipe Checking etc
Reporting for the Waiting time before each loading is accomplished!
Drivers Waiting Turn
Different Card Expiration:
Cards Can be expired and automatically deleted from the system maximum loading, Expiration Date, or maximum Routes
Cards can be programmed but Disabled.
Different Type of Checks depended on card Category.
Different Waiting time For each card
Minimal Operation required by Drivers:
Driver Only pass the barcode card trough a local badge reader and then the silo discharges automatically the quantity that was specified by the Central Planning Office
Any Errors or Check Faults Reported From the main System will be Displayed to the driver from the Terminal’s Display.
Terminal Keys can be Un/locked From the Main System Operator
Minimal Operation required by Operators:
The AWIS Operator can have a complete Knowledge of the weighing terminals from a monitor screen
Any Errors or Check Faults Reported From the main Systems monitor to the operator with a sound alarm and blinking Errors.
The AWIS Operator can Acknowledge any errors just by making a click on a button.
The Operator can Remotely access the weighing terminal (Zero, Lock, Send Messages, restart etc).
Minimal Operation required by the Card Programmers:
The Card Programmer can program any type of card with minimal procedures.
The State of each Programmed card can be easily viewed by the programmer.
