NT31 Surface Mounted Steel Weighbridge

The NT31 surface mounted weighbridge is a steel above the ground construction with an impressive life span. It consists of modular parts (drive sections) connected across with connective beams for an easier transportation and assembly of the weighbridge. A standard 2t capacity forklift is enough for the handling and the installation works. This weighbridge enables an instant access to the load cells and junction box through the top removable covers on the deck. The advantage of the top covers is the easy service and maintenance of the weighing equipment.
- Optimized, rigid steel structure designed for frequent use.
- Modular design allowing easy transport and installation.
- Top access to weighing equipment (load cells and junction box) through the removable covers on the deck.
- Completely steel and modular construction.
- Capacity according to DIN8119 (10t/axle) or DIN1072 (20t/axle) standards.
- Standard 330mm height; 300mm height also available, for applications that require more headroom.
|
|
|
|
 |
Prefabricated Concrete Foundations |
|
Side Rails
|
|
Galvanized Version |
└ ─ ─ ┘ Factory fabricated foundations, eliminating the need for formwork and resulting in time and material saving as well as in a fully controlled and clean civil construction. This type of foundations can be pontooned in any horizontal concrete or asphalt surface.
|
|
Steel side rails bolted on each of the sides of the drive modules that can benefit the weighbridge by preventing accidents and thus minimizing the risk of driving off the deck. |
|
The weighbridge can be hot galvanized to reinforce its durability and operational life. |
|
Platform Length
|
6m to 18m*
|
|
Platform Width
|
3m*
|
|
Platform Height
|
330mm to 420mm
|
|
Ramp Height
|
330mm to 420mm
|
|
Steel Type
|
ST37
|
|
Scale Capacity
|
up to 120t
|
|
Loading Capacity
|
10t to 20t per truck axle
|
|
* other lengths and dimensions available upon request
|
|