DIY Steel Transportable Weighbridge

The DIY is a portable surface mounted weighbridge suitable to weight most kinds of trucks. Its steel deck makes the DIY a cost-effective, though sturdy scale solution. This weighbridge comes fully assembled with factory mounted load cells, reducing the average installation time by half. The top removable covers on the deck of the weighbridge, offer easy access to the load cells and the junction boxes for instant maintenance and service of the equipment.
- Consists of equal-sized drive decks and side modules, bolted on each of the sides of the drive decks.
- Factory mounted load cells.
- Top access to weighing equipment (load cells and junction box) through the removable covers on the deck.
- No need of special foundations. This weighbridge can be installed on a concrete or asphalt surface.
- Completely steel and modular construction.
- Ideal solution for sites with often relocation needs.
- Side modules working as side barriers preventing accidents.
 |
|
 |
|
 |
Steel Foundations |
|
Portable Steel Ramps
|
|
Galvanized Version |
Factory prefabricated and mounted steel foundations, that can be put directly on compacted earth, horizontal concrete surface with minimum reinforcement or asphalt.
|
|
Set of four steel entry and exit ramps, with standard width of 1200mm and height depending on the chosen foundation
|
|
The weighbridge can be hot galvanized to reinforce its durability and operational life. |
Platform Length |
6m - 18m*
|
Platform Width |
3m*
|
Platform Height |
360mm
|
Ramp Height |
360mm - 500mm**
|
Steel Type |
ST37
|
Scale Capacity |
up to 120t
|
Loading Capacity |
10t - 20t per truck axle
|
*other lengths and dimensions available upon request
**depending on foundation
|
|