Product Description

DIY is a new transportable steel weighbridge model designed in two parts, for quick and easy installation. The first is the main body, which consists of three or five main modules depending on weighbridge length. Steel foundation can be attached underneath each module as an option. The second part, are the side modules which are bolted on each side of the main modules. (Yellow painted parts in pictures). These modules work also as side barriers preventing trucks from driving out of the weighbridge. In addition, factory pre-mounted load cells come as standard equipment of the scale. As a result, the installation time on site is reduced in half a day. (Note that all load cells have 2 direction bumpers. Top access to load cells and junction box allows easy maintenance and service.

Basic Features

Options

Pre-fabricated. pre-mounted steel foundation (Option)

Different foundation options are providing the opportunity to have temporary weighing sites. This is very useful for:

• Construction sites, mines, quarries, or agricultural applications, where often changes of weighbridge location is necessary
• Rented areas, so that weighbridge foundation does not remain in rented area when contract ends
• Leasing contracts that can also include foundations
• Quick weighbridge start up, customer can have a weighing station in less than 1 day
• Renting of weighbridges

Depending on existing conditions there are the following foundation options available :

• On site there is already an existing concrete surface relatively horizontal, with trucks circulation:
  
  No extra foundation is needed. Weighbridge can be fixed on existing under the loadcells, standard foundation plates, via chemical bolts directly on existing concrete surface. Eventually some shims will be needed if surface is not horizontal.
  
  
• On site there is already an existing concrete surface or asphalt surface:
  
  (STF 15) A 15mm special steel foundation arrangement is needed, to be fixed in our factory under existing standard foundation plates.
  
  
• On site there is only earth. Then a earth treatment is necessary to 300 mm compacted earth:
  
  (STF 140) A 140mm special steel foundation arrangement is needed, to be fixed in our factory under existing standard foundation plates.

Transportable steel ramps (Option)

A set of (4x) four steel entry and exit ramps can be combined with the DIY weighbridge, for quick installation and easy relocation.

Width: 1200mm

Height:

• 360mm (Sold separately)
• 500mm (Combined with Pre-fabricated Steel Foundation)

Recommended Accessories:

Flintec RC3 Compression Load Cell OIML and NTER approved, European quality compression load cell. IP 68 protection. Capacity 30t or 40t. Stainless steel construction.

LD 5218 Weight Indicator Alphanumeric keyboard, LCD display, rechargeable battery. RS232 connection. Stainless steel or aluminum vesrion available.